Image
Product
Price
- 2.5 in. Diameter Sold In Pairs; Includes Hangers; Offset Inlet/Offset Outlet Mufflers Required
- Tailpipe Set; 2.5 in. Diameter Sold In Pairs; Includes Hangers; Offset Inlet/Offset Outlet Mufflers Required;
- Tailpipe Set
- Product Attributes:
- Tubing Diameter: 2.500 In.
- Automotive Item Grade: High Performance
- Exhaust Pipe Wall Max Gauge: 16
- Inlet Diameter: 2.500 In.
- System Type: Tailpipe
- WARNING CA Proposition 65: No
- Fitment: Direct Oe Replacement
- Overall Length: 49.000 In.
- Outlet Diameter: 2.500 In.
-
Features:
- Mandrel Bent 16 Gauge Aluminized Tubing
- Exits At Rear Of Vehicle
- 3 Year Limited Warranty
- Premium Flowmaster Quality
- Gray Color
- These Builder Series tailpipes are constructed from 2.50-inch mandrel-bent 16-gauge aluminized steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit straight-out the back under the rear bumper. Designed to be used with Side Inlet/Opposite Side Outlet mufflers such as part# 942548 (Super 44 Series) or 942553 (50 Series) mufflers. Covered by our 3-year Limited Warranty. Note: Not designed to fit in factory bumper exhaust cutouts. Some fitment may be necessary. Does Not include installation hardware or exhaust tips.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1988 - Ford Mustang | V | - | 8 Cyl 5.0L | GT | 302 |
- Dual Rear Exit; 2.5 in. Diameter Sold In Pairs; Includes Hangers/Stainless Tips; Offset Inlet/Offset Outlet Mufflers Required; 409 Stainless Steel
- Tailpipe Set; Dual Rear Exit; 2.5 in. Diameter Sold In Pairs; Includes Hangers/Stainless Tips; Offset Inlet/Offset Outlet Mufflers Required; 409 Stainless Steel;
- Tailpipe Set
- Product Attributes:
- Tip Quantity: 2
- Tubing Diameter: 2.500 In.
- California Proposition 65 Chemical Name 2: Chromium (hexavalent Compounds)
- California Proposition 65 Chemical Name 1: Nickel (metallic)
- Inlet Diameter: 2.500 In.
- WARNING CA Proposition 65: Yes
- Heat Shield Attached: No
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Exit Position: Dual Rear
- Tip Diameter: 2.500 In.
- Single or Dual: Dual
- System Type: Tailpipe
- Outlet Diameter: 2.500 In.
-
Features:
- Mandrel Bent 16 Gauge 409 Stainless Steel Tubing
- Limited Lifetime Warranty
- 2.50 in Pre Bent Tailpipes
- Exits At Rear Of Vehicle
- Premium Flowmaster Quality
- 1 pair
- These Builder Series tailpipes are constructed from 2.50-inch mandrel-bent 16-gauge stainless steel tubing for maximum flow, tuck up high in the chassis for good clearance, exits straight-out the back under the rear bumper and includes long polished 304 stainless steel tips. Designed to be used with Side Inlet/Opposite Side Outlet mufflers such as part# 842548 (Super 44 Series) or 842553 (50 Series) stainless steel mufflers. Covered by our Lifetime Limited Warranty. Note: Not designed to fit in factory bumper exhaust cutouts. Some fitment may be necessary. Does Not include installation hardware.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
45209/45210
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1988 - Ford Mustang | V | - | 8 Cyl 5.0L | LX | 302 |
Showing 1 - 2 of 2 products
Loading...